Repair leaky seams and rivets in aluminum boats with the Aluminum Boat Repair Kit. Each Aluminum Boat Repair Kit contains 8 ounces of G/flex 650 epoxy, adhesive filler, application syringes, mixing pots and sticks and protective gloves. Illustrated, detailed instructions explain how to repair l..
West System pigments are epoxy-based liquid colorants used to tint the epoxy mixture to provide an even color base for the final finish system. The colored surfaces also tend to highlight flaws and imperfections. Cured, pigmented epoxy surfaces are not a final finish, but require an additional..
105 Epoxy Resin is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with ..
This kit offers the right epoxy, fiberglass and fillers to complete repairs to cracks and holes, gelcoat blisters, delaminated cored panels and more. Detailed instructions show users how to make lasting repairs.Each Fiberglass Boat Repair Kit contains eight packets of WEST SYSTEM 105 Resin and..
403 Microfibers, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities while retaining excellent wetting/penetrating capability.Color: off-white...
This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding. Its color is a consistent brown, so 405 can be used to modify the shade of other WEST SYSTEM filler..
406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in c..
407 Low-Density filler is a blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark red/brown color...
410 Microlight is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is al..
420 Aluminum Powder will increase the hardness and abrasion resistance of the coated surface and improve its moisture resistance. 420 provides limited protection from ultra-violet light in areas that will not be protected with other coatings and can be used as a base for subsequent painting. Cures t..
A proprietary blend designed to improve sured epoxy's moisture-exclusion effectiveness. 422 is used as a barrier coating additive to help prevent gelcoat blistering in polyester fiberglass boat hulls. 422 aksi increases the epoxy's abrasion resistance. Cures to a light grey color...
423 Graphite Powder is a fine black powder that can be mixed with West System epoxy to produce a low-friction exterior coating with increased scruff resistance and durability. Epoxy/graphite is a communly used low-load, low-speed bearing surface, and as a coating on rudders and centreboards, or on t..