Brand: System Three
Model: 0520k14
Mosaic Arts and Crafts Resin is an easy-to-use, decorative, self-leveling two-part epoxy coating resin. It rapidly develops hardness and produces an ultra-clear, high-gloss finish that beautifies and protects your projects.Mosaic Arts and Crafts Resin contains no solvents and is odor-free, mak..
$41.99
Brand: System Three
Model: Wood Flour
Wood Flour, a fine sawdust that has been filtered so that there are no lumps, is excellent for creating wood glue and structural fillers and fillets. It is a fibrous filler that is also thixotropic. To make a smoother fillet, some users add a small amount of Silica Thickener...
$14.49
Brand: System Three
Model: 6164S06
CastFX Dry Metallic Pigments are powders that can be added directly to System Three RiverCast, MirrorCast, and MirrorCoat. These pigments add a stunning pearlescent effect to our casting resins. CastFX Dry Metallic Pigments can be intermixed with one another to create your own unique col..
$39.99
Brand: System Three
Model: 0800K
Clear Coat is an extremely low viscosity, water white, "penetrating" epoxy system. Clear Coat cures to a brilliantly clear, very tough finish without the usual "amine blush" associated with some epoxy resin films. Clear Coat contains no volatile solvents.Turbo Cure may be added speed up cures during..
$79.99
Brand: System Three
Model: F100K
Cold Cure may be used effectively down to 35ºF in 100% relative humidity. It is an easy to use 2:1 ratio. It will not blush or turn milky in thin films and cures overnight. Cold Cure is a 100% solids, unfilled, medium modulus, low viscosity, moisture tolerant epoxy system. Cold Cure has no VOCs. It ..
$84.49
Brand: System Three
Model: 1430K
EZ-Fillet is a wood flour-filled two-part putty specifically designed for stitch-and-glue wooden boat construction. Its ketchup-like, self-leveling consistency allows it to be measured by volume or weight. The resin (part A) is brick red in color while the hardener (part B) is a deep, dark green. A ..
$63.99
Brand: System Three
Model: F1110K38
For over 35 years, G-2 has been an excellent adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as other materials that are difficult to bond. G-2 was developed primarily for waterproof bonding of rot-resistant woods used in fine y..
$42.99
Brand: System Three
Model: 1230K
GelMagic is a toughened, non-sagging, two component, structural epoxy adhesive designed for superior bonding to wood and most porous materials. It is unique in that it starts as two self-leveling liquids, which form a soft, thixotropic, sag-resistant paste when mixed. Measuring is easily accomplishe..
$63.99
Brand: System Three
Model: 0100A
System Three General Purpose Epoxy is our original product. It actually gave the company its name. From the founding of the company until just a few years ago it has been the workhorse of the product line. The system formulation, containing one resin and three curing agents or hardeners contains a s..
$106.98
Brand: System Three
Model: 1200K
MetlWeld is a super tough epoxy adhesive designed to bond dissimilar materials such as steel to wood. MetlWeld exhibits excellent elastic properties and superior bond strength while remaining rigid. MetlWeld will bond to stainless steel, galvanized steel, aluminum, copper, glass, ceramic, neoprene r..
$41.99
Brand: System Three
Model: 0530k40
MirrorCast is a crystal clear epoxy casting resin designed to fill knots, cracks and voids in wood substrates with minimal shrinkage. Use MirrorCast to fill voids prior to finishing wood components.Create beautiful decorative wood artFill medium to large size knotsFill inclusions in wood slabsTint w..
$70.99
Brand: System Three
Model: 0500K
MirrorCoat is a pourable, self-leveling bar and tabletop coating.• Easy application• Cures crystal clear• Exceptionally tough; scratch resistant, waterproof, alcohol proof• A single application give the appearance of multiple coats of varnish• 100% solids; no solvents, low odor• Apply multiple coats..
$70.99