Shopping Cart

Fillers & Powders

Antisag

$11.99

Antisag

Antisag (Cab-o-sil) is light weight, low density fumed silica powder additive for use in all types of resins and gelcoats although, when used to thicken polyester or vinylester resins, creates an..

$11.99

Chopped Strand

$13.99

Chopped Strand

Chopped strand is actual strands of fiberglass chopped into 1/4" lengths. It can be added to any type of resin or gelcoat alone or in combination with other fillers where strength is required. ..

$13.99

Econofil

$8.99

Econofil

Econofil or Industrial Talc is a magnesium hydroxide powder and is the most economical filler. It is an additive used to thicken all types of resins and gelcoats and is easily applied and sanded..

$8.99

Milled Fibers

$10.99

Milled Fibers

Milled Fibers are ground fiberglass fibers. They will add moderate strength to any type of resin or gelcoat alone, or in combination with other fillers. ..

$10.99

Mini Fibers

$15.99

Mini Fibers

Mini Fibers are dense, ground polyethylene fibers. It is an additive for all types of resins and gel coats although, when mixed with epoxy resins, creates an excellent medium sanding, non-slumping ..

$15.99

Profill

$7.59

Profill

Profil, also known as glass bubbles is a hollow silicone dioxide powder. It is a non-absorbent additive used to extend all types of resins and gelcoats. It can be used in resins alone however, its m..

$7.59

West System 403 Microfibers Filler 6oz

$17.99

West System 403 Microfibers Filler 6oz

403 Microfibers, a fine fiber blend, is used as a thickening additive with resin/hardener to create a multi-purpose adhesive, especially for bonding wood. Epoxy thickened with microfibers has good gap..

$17.99

West System 404 High-Density filler 15.2oz

$22.99

West System 404 High-Density filler 15.2oz

404 High-Density filler is a thickening additive developed for maximum physical properties in hardware bonding where high-cyclic loads are anticipated. It can also be used for filleting and gap fillin..

$22.99

West System 405 Filleting Blend Filler 8oz

$28.99

West System 405 Filleting Blend Filler 8oz

This strong, wood-toned filler is good for use in glue joints and fillets on naturally finished wood. It mixes easily with epoxy and lets you create fillets that are smooth and require little sanding...

$28.99

West System 406 Colloidal Silica Filler 1.7oz

$18.99

West System 406 Colloidal Silica Filler 1.7oz

406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mix..

$18.99

West System 407 Low-Density filler 4oz

$26.99

West System 407 Low-Density filler 4oz

407 Low-Density filler is a blended microballoon-based filler used to make fairing putties that are easy to sand or carve. Reasonably strong on a strength-to-weight basis. Cures to a dark red/brown co..

$26.99

West System 410 Microlight filler 2oz

$25.99

West System 410 Microlight filler 2oz

410 Microlight is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density f..

$25.99

Showing 1 to 12 of 12 (1 Pages)