Shopping Cart

Shipping Estimate

Applies to this product only
Country:
Region / State:
Post Code:
Translucent Wood Finish 3.78 Litre

Translucent Wood Finish 3.78 Litre

  • $109.99

Available Options

          

Premium Translucent (7400)

  • 7410 - Natural Gloss


    This is a very lightly toned finish that will not change the natural color of the wood. The gloss finish gives a high shine wet look.

  • 7415 - Cedar Gloss


    This is tinted to a cedar toned finish
    that contains extra pigments and will deepen the color of the wood. The gloss finish gives a high shine wet look.

  • 7420 - Natural Satin


    This is a very lightly toned finish that will not change the natural color of the wood. The satin finish gives a subtle eggshell sheen.

  • 7425 - Cedar Satin


    This is tinted to a cedar toned finish
    that contains extra pigments and will deepen the color of the wood. The satin finish gives a subtle eggshell sheen.

  • 7429 - Mission
    Brown Satin

    Mission Brown is 
    a deep rich brown, with black under tones. The satin
    finish gives a subtle eggshell sheen.

USES:

All exterior vertical wood such as siding, fences, logs, trim and doors (not for use on decking).
 

SURFACE PREPARATION:

All surfaces must be clean, dry, and free from dirt, mildew stains, dust and other foreign matter. Remove surface stains, dirt and failed oxidized stains with Superdeck® Wood Cleaner. Remove solid stains or paints with Superdeck® Wood Stripper. For redwood and cedar, follow cleaning or stripping with Superdeck® Wood Brightener to remove tannin stains and brighten wood to its original color. For new wood remove mill glaze with Superdeck® Wood Brightener. 
 
WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment, such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority.
 

PRODUCT PREPARATION:

Product should be shaken or stirred before and during application. When using more than one container of product, intermix all product and stir well to ensure color consistency.
 

THINNING:  

Do not thin. 
 

APPLICATION METHODS:

Product may be brushed, rolled or sprayed. If sprayed, use the lowest possible pressure needed for a reasonable spray pattern. Back rolling is suggested when spraying, working the product smoothly and evenly into the wood. This will decrease the possibility of pools or puddles on the surface and ensure a properly penetrated finish.
 

APPLICATION:

Proper application is essential in order to accomplish the full benefits of product appearance and performance. Different wood species, textures and natural color will affect finished shade. Always test a small area first before coating entire job. Saturate surface leaving a wet sheen. Back brush product using smooth even strokes during all application methods. Maintain a wet edge and overlap strokes when applying. Apply product to the entire board lengths to prevent lap marks. Thoroughly coat the porous ends of all boards with several coats.
 

NUMBER OF COATS:

Two coats are recommended for maximum protection and full coverage. Allow 24 hours dry time between coats.
 

APPLICATION TEMPERATURE:

40°F.–95°F. Do not apply if wood surface is hot to touch or if rain is likely to occur.
 

DRY TIME @ 77°F:

8–12 hours to touch, 24 hours to recoat depending on weather conditions.
 

SPREAD RATE:

Approximate spread rate:
Smooth Surfaces: 400–500 sq. ft./gal.;
Rough Sawn: 250–350 sq. ft./gal. 
 

CLEAN UP:

Clean brushes and equipment with mineral spirits or paint thinner following product manufacturer’s directions. Dispose of empty container or unused portion in accordance with local, state, and federal regulations.

The highest form of protection found in nature comes in many layers. Trees produce layers of bark to protect the heart of the tree.  Like an extra layer of bark, Premium Translucent Finish acts as an additional layer of protection and beauty for your real wood sided homes, trim, doors and fences.  Premium Translucent Finish will beautify wood with a choice of four brilliant finishes.  The long lasting results let you relax and enjoy your outdoor living space!

PROTECT YOUR INVESTMENT

DUCKBACK® Premium Translucent Finish is for vertical wood such as siding, trim and doors. The durable and flexible alkyd resins provide superior water protection, while the highest quality transparent iron oxide pigments reflect harmful UV rays that fade and damage wood.
 

  • • Two oil combination for a hard yet flexible finish that won't crack or peel
  • • Use on bare wood or apply over stained surfaces
  • • Two coats required for maximum performance
  • • Satin finish for a moderate sheen
  • • Gloss finish for a high shine "wet look"
  • • For all seasons in all environments
Available in 4 ready to use classic colors:
 
            
     

Write a review

Note: HTML is not translated!
    Bad           Good
Tags: paint,