Shopping Cart
Hairline Crack Filler

Hairline Crack Filler

  • $24.99

Available Options

Cure time:

DRYING time varies depending on temperature. FAST DRY using a hot hair dryer for 3 minutes + 30 minutes cool down. NORMAL DRY: 2 hours (at 70ºF/20º C). It will harden overnight and achieve maximum strength and adhesion after 14 days.

Storage:

Store in a cool place below 50°F / 10°C. (A refrigerator is best.)

Tips:

  • Suitable for above the waterline use.
  • Before applying, remove built up grime and dirt by scraping a pin point along the crack.
  • Before using, shake the tube well (30 seconds) for even consistency.
  • For deep or large cracks, ocnsider usingMagicEzy 9 Second Chip Fix instead.

How to Apply:

Do not use below 50°F/ 10°C

magicezy-repair-steps


magicezy-repair-steps

1. Prepare

  • Do not use below 10°C / 50°F
  • Suitable for above the waterline use.
  • Scrape a pin point along crack to remove grime and dirt.
  • Wash/scrub soapy water into damage, then rinse with clean water. Allow to fully dry in sun or accelerate dry with a hairdryer.
  • Rotate/shake the tube for 30 seconds for even consistency.

Color match?

Mix two or more colors on a clear plastic wrap. View new color when placed over the surface.

2. Apply

  • For plastic or aluminum surfaces, apply a thin coat of MagicEzy MegaFusion Primer / Sealant and allow 2 hours to cure (at 70ºF/20º C).
  • Have a tissue ready in your spare hand.
  • APPLY a drop on the damage.

How do I apply on vertical surfaces?

To prevent slumping or for a fast dry use a hairdryer for 3 minutes to form a skin.

3. Level

  • Rapidly wipe the ‘LEVEL’ across the repair 5 times. FAST wipes help Hairline Fix penetrate deeply inside the damage.
  • Clean the ‘LEVEL’ with the tissue and TRIM off surface smears.
  • Some deep cracks may require several coats to fill completely. Allow at least 2 hours in between coats before re-applying (overnight is best).

How do I apply in hot/cold weather?

In temperatures above 90ºF (30ºC) lay a damp towel over the area until hand temperature is reached. Below 55ºF/15ºC, set with hairdryer for 3 minutes.

4. Trim

  • TRIM to remove smears off the repair edge (but not the repair itself). Dampen or use a tissue to help clean-up if necessary.

DRYING time varies depending on temperature. FAST DRY using a hot hair dryer for 3 minutes + 30minutes cool down. NORMAL DRY: 2 hours (at 70ºF/20º C). It will harden overnight and achieve maximum strength and adhesion after 14 days.


MagicEzy Hairline Fix seals and colors stress cracks… FAST. The structural grade adhesion helps prevent cracks from spreading. Available in 11 colors. Repairs guaranteed for 3 years. Size: 12.9mL / 0.43 fl OZ resealable tube.

Features:
  • Repairs very fine cracks and scratches
  • Easy to use, one-part solution
  • Helps prevent cracks from spreading
  • Available in 11 colors
  • 3 year repair guarantee
  • 30 day money-back satisfaction guarantee
Use on:
  • Fiberglass / Gelcoat – Boats, jet skis, kayaks, RVs
  • Ceramics & Stone – Tiles, bench tops, vanities
  • Showers, baths, basins & vanities
  • Most plastics* – Canoes, kayaks, dinghies
  • Aluminum and metal* – Boats, cars, appliances
  • 9 Second Chip Fix repairs for a gloss finish

*For plastic or aluminium surfaces, prepare the surface using MagicEzy Mega Fusion first.


Write a review

Note: HTML is not translated!
    Bad           Good
Related Products