All
you need for sure adhesion of 3D prints Magigoo
is an easy to use 3D printing adhesive designed to address 'the first
layer not sticking problem'. Magigoo ensures a strong adhesion to the
hot plate. But the magic starts when printing is ready: just wait for
the plate to cool down and then remove your prints with just a finger
flick! In addition, Magigoo helps to prevent warping. Isn't it magic?
Regardless of you being a hobbyist or professional - it is extremely
rewarding to have a 30 hour print complete without any warping and
having it release easily once cooled.

• Over
  100 applications

• ABS,
  PLA, PETG, HIPS, ASA, TPU

• Easy
  application

• Easy
  release

• Easy
  clean

• No
  smell

• Non-toxic

• No
  additional tools needed

• Easy
  to transport

• Nicer
  print finish

Main
Features

• Easy
  application: applying Magigoo is as easy as child's play. Shake,
  press, apply. Spread on an active printing area only. No need to
  cover the whole surface

• Easy-release:
  Magigoo adhesive properties are designed to release the 3D print
  once the build plate has cooled.

• Easy-clean:
  Magigoo is easily cleaned with water.

• Long-lasting:
  Magigoo last for 100+ average prints.

• Odorless
  and safe: Magigoo is safe to use - be it in a closed room or
  educational workshop with kids.

Important
note : The applicator has an active spring valve, which activates
when applicator is pressed against the build plate. Please do not
press the bottle as "ketchup bottle" , otherwise the
applicator may pop off. Bottle may be slightly squeezed, only
when the nib is pressed against the bed and it may be necessary only
if bigger flow is required. Bottle must not be squeezed when cap is
off any other time as it may result in glue popping out of the
bottle.