



The Creality CR-10 V3 is highly upgradeable and boasts one of the largest print volumes on the market. The CR-10 V3 has a 300mmX300mmX400mm print bed. This makes it easy to print large costume parts or tools requiring less part separation. This is an ideal FDM printer for 3D hobby enthusiasts, cosplayers, and even persons who require large scale rapid prototyping.
--
OPEN SOURCE
In the spirit of innovation and progress, Creality has decided to make our firmware and design plans available to all for extensive modding and improvements.
POWERFUL HOTEND KIT
The Ender 3 Max has a modular hotend with a heat-resistant copper nozzle. This allows for rapid heating, and smoother extrusion.
GIANT Z AXIS PRINT SIZE
The 300x300x400mm print bed is great for movie and costume props! The unique Bowden extruder design reduces the weight on the X-axis, which delivers better performance even on very tall prints.
SMOOTH AND STABLE LINEAR PULLEY SYSTEM
The Ender has done away with flimsy ready rods, and in place has been engineered with dimensionally accurate and stable extrusion. This allows for a very smooth motion system on the X-Y-Z axis, making the Ender 3 Max more reliable.
DUAL COOLING FANS-EFFECTIVE IN HEAT DISSIPATION
The axial cooling fan continuously helps hotend heat dissipation. The dual blower fans provide quick cooling for extruded filament.
MANUAL LEVELLING (UPGRADEABLE)
The CR-10 is manually leveled, however it is easily upgraded with the BL touch(Auto-Leveling Device) if needed!
FILAMENT SENSOR
The CR-10 V3 is equipped with a filament sensor to stop your prints when a breakage or the end of a filament roll is detected. Never waste another print due to insufficient filament!
ALL-METAL EXTRUDER
The Ender 3 Max boasts an all-metal Bowden extruder that is powerful, durable, and allows filament to feed smoother than a plastic feed system.
CARBORUNDUM GLASS PLATFORM
With its superiority in heat resistance and surface flatness, the Carborundum glass platform helps prints adhere better and allow users to remove prints easier. The glass platform is exceptionally durable, so there is no warping or scratching the bed surface.
TITAN DIRECT DRIVE
The 3d printer equipped with genuine Titan Direct Drive, the torque of the stepper motor is lower. It's more precise to control the feed-in filament, great at printing the soft filament like TPU.
TMC2208 HIGH-PERFORMANCE SILENT DRIVER
The German import TMC2208 chip driver is used in the X-axis and Y-axis. This chip is utilized for the effective reduction noise caused by the stepper motors and movement of the axis.
Technical | |
Bed Dimension | 300x300x400mm |
Printing Speed | 30-60mm/s (recommended), ≤180mm/s |
Print Precision | ±0.2mm |
Layer Thickness | 0.1-0.4mm |
Power Supply Wattage | 350W |
Voltage | 115V-230V AC50/60HZ DC24V |
Machine Size | 600x590x610mm |
Machine Weight | 8.7kg |
Molding Tech | FDM 3D |
ETC | |
ETC | Staff Pick |
- Stock: In Stock
- Model: CR-10-V3
- Weight: 13.50kg
- Dimensions: 63.50cm x 52.50cm x 27.00cm
- SKU: 125405