Menu
Your Cart

System Three Metl Weld Adhesive

System Three Metl Weld Adhesive
System Three Metl Weld Adhesive
System Three Metl Weld Adhesive
System Three Metl Weld Adhesive
System Three Metl Weld Adhesive
System Three Metl Weld Adhesive
System Three Metl Weld Adhesive
System Three Metl Weld Adhesive
System Three Metl Weld Adhesive

MetlWeld is a super tough epoxy adhesive designed to bond dissimilar materials such as steel to wood. MetlWeld exhibits excellent elastic properties and superior bond strength while remaining rigid. MetlWeld will bond to stainless steel, galvanized steel, aluminum, copper, glass, ceramic, neoprene rubber and most porous surfaces. For use in high stress applications when bonding metals to materials such as glass, composites, wood and concrete.


  • • 100% waterproof.
  • • Will not shrink upon curing; fills large gaps without loss of strength.
  • • Features a convenient 1:1 mixing ratio.
  • • Superior adhesion to brass, copper, bronze, aluminum, galvanized, stainless and mild steel, glass, wood, composite and most porous materials.
  • • Forms permanent, non-brittle bonds with high impact and creep resistance.
  • • Cures reliably at temperatures as low as 50°F.
Product Uses:
Use MetlWeld for metal to metal, metal to wood and for bonding other dissimilar materials like stone, concrete, ceramics and even glass. MetlWeld does not bond well to thermoplastic materials like polyethylene, polypropylene, nylon, Delrin®, PVC, etc. Testing is always prudent if there is any question about the materials being bonded.
Surface Preparation:
Surfaces to be bonded should be freshly sanded and clean of grease, wax, oil and other contaminants. At 77°F allow 48 hours to cure and develop strength (longer at cooler temperatures) before subjecting to stress.

Available Colors:

Gray

  • Mix Ratio by Volume: 100:100
  • Mix Ratio by Weight: 100:91
  • Total Solids: 100%
  • Mixed Viscosity: 9,000 cps
  • Mixed Color: Gray
  • Coverage (20mil Glue Line): 80 ft2/Gal (2m2/L)
  • Minimum Application Temperature: 50°F (10°C)
  • Maximum Service Temperature (continuous use): 125°F
  • Lap Shear Strength: Aluminum to Aluminum, psi:2,150; Cold-Rolled Steel:2,240;Brass:1,800
  • T-Peel Strength, PLI: 28
  • Gel Time @ 77°F (25°C): 30 Minutes (100g mixture)
  • Tack Free Time @ 77°F (25°C): 8 Hours

Write a review

Note: HTML is not translated!
Bad Good
Captcha
$41.99
  • Stock: In Stock
  • Model: 1200K
  • Weight: 1.00kg
  • Dimensions: 15.24cm x 15.24cm x 25.40cm

Available Options

Tags: Metl , Metal , Weld , Epoxy , Adhesive , System , Three , Marine
COOKIE POLICY
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.