Brightside® Polyurethane is a hard, high gloss one-part polyurethane topside finish. Excellent application characteristics yield that “sprayed on” look when brush applied in thin coats and is ideal for use anywhere above the true waterline. Brightside Polyurethane is easy to clean, resists staining ..
Epifanes Clear Varnish, known around the world, is considered the ultimate in high gloss finish. This traditional marine varnish is based on tung oil, phenolic-modified alkyd resins and maximum U.V. absorbers. It has outstanding protection for all marine and household woods and can be applied ..
Bottomkote® XXX is specially formulated for the cost conscious boat owner requiring a good general purpose antifouling paint.Traditional Antifouling Protection for Most AreasSoft Eroding Bottom Paint for Cruising BoatsFast dry allows recoating between the tidesParticularly suited for fiberglass, woo..
Interprotect® 2000E with Microplates® is a unique two-part epoxy coating developed to protect fiberglass hulls from water absorption, which can lead to osmotic blistering. Microplates® create an overlapping barrier to help stop water migration through the coating. The Interprotect® system is the sys..
Uses Micron® Technology to provide excellent, long lasting antifouling protection against all types of fouling. Controlled polishing rate reduces build-up of old coatings and minimizes sanding.. Haul and re-launch without repainting. Micron Technology uses less copper more efficiently than old..
Primer for Brightside®, Premium Yacht Enamel
and other 1-part finishesPre-Kote is a unique V.O.C. compliant, single package, undercoater for use with
Brightside®, Premium Yacht Enamel or any one-part topside finish. Microspheres
are used to give Pre-Kote superior build and hide while improving fl..
Poli Glow is a proven concept in boat polish and is 'NOT' a boat wax. It is easily applied. It wipes on without the need for rubbing or buffing. It will not wash off with soap and water. And lasts for over 12 months!Poli Glow will work on the following: RV's, Boats, Canoes, Motorhomes, Painted ..
Rust-Oleum® Marine Coatings Topside Paint provides gloss retention and UV resistance in extreme weather conditions. Apply to fiberglass, wood or metal surfaces above the waterline. Flexible formula is easy to apply.UV resistanceDurability in extreme weather conditionsExcellent Gloss retentionFOR BES..
Epoxy Primekote® is a multi-purpose two-part epoxy primer that is the recommended primer for use with two-part finishes such as Perfection® Polyurethane and can also be overcoated with any Interlux topside paint. It is also used as part of a system to resurface cracked and crazed gelcoat prior..
Interdeck* provides an excellent slip resistant finish. It contains a fine aggregate and will apply easily on all substrates.* Low sheen finish prevents dazzling reflected sunlight off decks* Easy application* Available in a range of coloursThe tough polyurethane resin protects decks against everyda..
Schooner® Varnish combines the very best of classic, varnish craftsmanship with the newest technology. Schooner® Varnish contains ultra-violet filters to screen the sun's damaging rays for remarkable durability, excellent water resistance and silky application. Superior self-leveling property and a ..
Cetol® Marine with Next Wave™ UV-absorbing technology is a durable translucent protective wood finish for use above the waterline on interior and exterior woods. Next Wave technology is the next generation of Cetol Marine from Sikkens with a unique UV-absorbing package, which is specialty resins a..